Krups GX420851 Mode D'emploi page 6

You can choose between the 3 different modes on of your coffee grinder with scale:
– Cups mode - allows you to choose grinding amount by the number of cups
– Weight mode - allows you to set the quantity you want using Grams or
Ounces
– Manual mode - allows you to grind coffee without using the integrated scale
and manually Start and Stop grinding operation.
To select the desired mode, simply press the Menu button (fig 14). Once selected, you can
adjust desired grinding amount in the selected mode.
NOTE: Your coffee grinder with scale will display in Cups mode by default.
1. Set the quantity of ground coffee by using the - & + buttons according to the desired
number of cups (up to 12 cups). (fig 15)
2. Press the START/STOP
the number of cups during operation until it reaches the desired quantity. (fig 16)
Once the selected amount has been reached, the appliance will stop automatically.
NOTE:
„ If you want to stop the appliance before grinding is complete, press the START/STOP
button. To resume operation, press the START/STOP
the cycle until completion.
„ If you remove the coffee grounds in the container during an active grinding operation, it
will reset the scale and start the cycle over.
3. Remove the ground coffee holder, tap the container gently, remove the lid and pour the
ground coffee into the filter of the coffee maker or use a measuring spoon. (fig 17)
4. To obtain additional ground coffee, you can adjust the number of cups and press the
START/STOP
NOTE: Selected settings will be retained from one use to the next.
NOTE: You must empty the container after each cycle completion. If you try to start an
additional cycle without emptying the container, a warning icon
Cups
Grams
NOTE: The coffee ratio is based on SCAA gold cup standard for the best quality coffee.
NOTE: If you want to use the dripper provided or another container to catch the ground
coffee please refer to the TARE FUNCTION paragraph.
4
OPERATING THE COFFEE GRINDER
CUPS MODE
buttons to start grinding, the display will begin counting up
again. You can also empty the container and repeat the operation.
1 2 3
8 17 25 33
4 5 6
41 50 58
button again and it will continue
will display.
7 8 9 10
66 74 83
11 12
91 99