Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous
radiation exposure.
DESCRIPTION
Professional digital power amplifier
1. POWER SIWTCH
Lorsque vous appuyez sur ce bouton, vous mettez en marche l' appareil Pour éteindre l' amplificateur, il faut appuyer une nouvelle fois sur ce bouton
2. CHANNEL GAIN CONTROL
these potentiometers allows the adjustment of the channel A input level ( left channel ) and channel B input level ( right channel )
3. LED PROTECTION
When this indicator lights, that means the power amplifier is in the protection mode. Switch off the device and find out the problem.
This power amplifier is protected against over heat, over load, short circuit, DC, softstart
4. LED "SIGNAL"
These leds give you a visuel information output signal level. Any illumination of the red clip indicates a state of overmodulation ( distortion at
extremely high volumes ). In this case, check the output signal of your mixer and turn down the input gain control
Please keep in mind that the power amplifier cannot correct any distortion.
REAR PANEL :
5. CHANNEL OUTPUTS ( TURNLOCK )
Connect these turnlock outputs to your speakers. The branching is +1, -1.
6. XLR/JACK CHANNEL INPUTS
Connect these inputs to the stereo output of your mixer. ( XLR : balanced / Jack : unbalanced )
7. AC SOCKET
Plug the AC power cord into any standard AC outlet. Before plugging this cord in, be sure the voltage of AC outlet is correct ( 220V in france )
8. FAN
This part is the air exit. Don' t obstruct it.
All manuals and user guides at all-guides.com
www.BSTDJ.com
ENGLISH
CAUTION
To prevent electric shock do not remove cover (or bottom) screws.
No user serviceable parts inside refer servicing to qualified
servicing personnel.
5
Publicité
