Operation - oneConcept Freshboxx Pro Mode D'emploi

OPERATION

Connecting the device
Insert the plug into the socket. The unit beeps and switches to standby mode. Only the
ON/OFF button is active.
Switching on the device
Press the ON/OFF button to turn on the unit. The following basic settings are set at the
factory:
• Fan speed: low (if you switch on the device for the first time, the fan runs briefly at
medium speed, but then changes to low speed)
• Cooling: off
• Wind mode: normal
• Timer: off
• Swing function: off
Key functions
SPEED When the power is on, press the SPEED button to set the fan speed in
the following order: low > medium > high > low. The corresponding
indicator will light.
COOL When on, press the COOL button to turn on the cooling/humidification
function. The corresponding indicator lights up. Press the key again to
deactivate the function. The corresponding indicator goes out.
TIMER In the switched-on state, press the TIMER key to set the switch-off timer
in the following sequence: 01 > 02 > 03 > 04 > ... > 12 > off > 01. As
soon as the timer has expired, the unit switches off automatically.
SWING When the timer is switched on, press the SWING key to switch on
the left/right oscillation function. The corresponding indicator lights
up. Press the key again to switch the function off. The corresponding
indicator goes out.
MODE Press the MODE button in the on state to set the wind mode in
the following order: Normal > Natural > Sleep > Normal. The
corresponding indicator will illuminate.
EN
19