Power Manager - Bosch NIT5469UC Manuel D'utilisation Et D'entretien

To access the basic settings:
The cooktop must be switched off.
Turn on the cooktop.
1.
Within10 seconds, touch the Timer key for about
2.
4 seconds.
The first four displays provide product information.
Touch the settings area to view the individual displays.
Product information
Customer service index (CSI)
FD number
FD number 1
FD number 2
Touching the Timer key again takes you to the basic
3.
settings.
In the display and
™ ‚
timer display lights up as a default setting.
‹
Touch the Timer key repeatedly until the required
4.
function is displayed.
Select the desired setting from the settings area.
5.
Touch the Timer key for at least 4 seconds.
6.
The settings have been saved.
Quit basic settings
Turn the cooktop off with the main switch.
16
Display
screen
‹‚
"š
Š† .
.
‹ †
light up alternately and in the

Power Manager

You can use the power manager to set the total power of
the cooktop.
The cooktop is preset at the factory. Its maximum
performance is specified on the rating label. You can use
the power manager to change the value in accordance
with the requirements for the relevant electrical
installation.
In order not to exceed this set value, the cooktop
automatically distributes the power available between the
cooking zones that are switched on.
As long as the power manager function is activated, the
output of a cooking zone may temporarily fall below the
nominal value. If a cooking zone is switched on and the
power limit is reached,
¬
display for a short time. The appliance automatically
regulates and selects the highest possible power level.
For more information about how the total power of the
cooktop is changed, see section ~ "Basic settings"
appears in the heat setting