Trouble Shooting - Silverline R12027X01 Manuel D'utilisation

seal with a mild detergent and warm water. Rinse and dry it
thoroughly after cleaning.
Caution! Only after the door seals are completely dry should the
appliance be powered on.
Replacing the LED light:
Warning: The LED light must not be replaced by the user! If the LED
light is damaged, contact the customer helpline for assistance. To
replace the LED light, the below steps can be followed:
1. Unplug your appliance.
2. Remove light cover by pushing up and out.
3. Hold the LED cover with one hand and pull it with the other hand
while pressing the connector latch.
4. Replace LED light and snap it correctly in place.

TROUBLE SHOOTING

If you experience a problem with your appliance or are concerned that
the appliance is not functioning correctly, you can carry out some easy
checks before calling for service, please see below. You can carry out
some easy checks according to this section before calling for service.
Warning! Don't try to repair the appliance yourself. If the problem
persists after you have made the checks mentioned below, contact a
qualified electrician, authorized service engineer or the shop where
you purchased the product.
56