Silverline R12027X01 Manuel D'utilisation page 48

Leveling of appliance
The appliance should be level in order to eliminate vibration. We
recommend that you level the appliance by the following steps.
1. Roll the refrigerator into place.
2. Turn the adjustable feet (with your fingers or a suitable spanner)
until it touches the floor.
3. Tilt back the top backwards for about 10-15 mm by turn the feet 1-2
turn further. This will allow the doors to self- close, providing a
consistent closed seal.
4. Whenever you want to move the appliance, remember to turn the
feet back up so that the appliance can roll freely. Reinstall the
appliance when relocating.
Caution! The rollers, which are not castors, should be only used for
forwardor backward movement. Moving the refrigerator sideways may
damage your floor and the rollers.
40