Section 2 Clutch Levers Vehicle And Blades - EMAK DR65HR8,5 Mode D'emploi

Chapter 5: Use

Section 2 Clutch levers vehicle and blades

At this point the gear belt will tighten
when you lower the vehicle clutch
Lever (Fig. 5.7). This lever allows your
walking tractor to continue forward or
backward, according to the chosen
gear. The walking tractor will remain
immobile, should the gear be in N
(neutral).
CAUTION :
Please pay attention to what gear
you have chosen, when you lower
the vehicle clutch Lever.
Release this lever in case of
difficulty, and your machine will
stop immediately.
The blade rotor clutch Lever activates
the blade rotor.
It is necessary to use two hands to It is necessary to use two hands to
unhook this lever, which is otherwise unhook this lever, which is otherwise
secured with a lock (Fig. 5.8). secured with a lock (Fig. 5.8).
This lock is designed for your safety and
prevents the operator from inserting
the blade rotor while the flail mower is
moving, in stead of standing still.
CAUTION :
When the blade rotor is working,
please always make sure that
nobody is near the blade rotor
(Fig. 5.9). NEVER ATTEMPT TO
UNDERTAKE A REGISTRATION
WITH THE ENGINE GOING.
1
21
Fig. 5.7
2
Fig. 5.8
Fig. 5.9