Danby DAC8010E Guide D'utilisation Et Soins De Propriètaire page 8

Installation Instructions
3) Completing the Installation (cont)
• Carefully place the air conditioner into the window with the "L" shaped
mounting bracket (on top) positioned in front of the upper window sash.
The bottom of the cabinet should be positioned on the "recessed" portion
of the window frame. Pull the window down until it rests just behind the
front flange of the (top) "L" shaped mounting bracket (See Fig. 5).
• Expand the shutter frames (fully) on each side and secure the top of the
frames to the window sash using one 3/4" screw on each side and one in
the "L" shaped mounting bracket (Fig. 5).
• Secure the shutter clamp on each side of the (lower) shutter and secure
to window sill using one 3/4" screw on each side (Fig. 5).
• Place the second foam sealing strip to fit the opening between the inside
and outside windows, then attach the safety lock to the outside window
frame using one 3/4" screw (See Fig. 6).
PLEASE NOTE: Window applications come in a variety of different styles.
Therefore, it may be necessary to modify or improvise your particular
installation.
Fig. 5
3/4" screws
Shutter clamps
Fig. 6
3/4" screw
7
Window sash
"L" Shaped
Mounting
Bracket
Safety Lock
Foam Seal