Oster TSSTTVDFL1 Manuel D'instructions page 9

USING THE PIZZA/ TURBO CONVECTION
HEAT FUNCTION (SEE FIG. 4)
Step 1. Turn the "Function" Knob to the Pizza "
function. When you select the Pizza function, the
Turbo Convection Heat will automatically activate.
Step 2. If you wish to switch to the regular Pizza function,
press the Turbo "
Turbo Convection Heat default selection. The blue
light of the Turbo Convection Heat button will turn off.
The Turbo Convection Heat Function turns on
a built-in fan that circulates hot air in the oven
chamber, cooking your food faster and more evenly.
Default Temperature: 200ºC.
Default Time: 16 minutes.
Step 3. To set the temperature:
Turn the Temperature "
increase or decrease the temperature setting. For
the Pizza Function, the temperature can be set from
170°C to 230°C in 15-degree increments.
Step 4. To set the time:
Turn the Time "
or decrease the cooking time. The maximum time
setting for Pizza is 60 minutes (1 hour). Once you
have selected the desired cooking time, press the
Start button to initiate the cooking process.
Step 5. To Start:
Press the "Start/Cancel" Button to start the cooking
process. The red Start/Cancel Button light will
illuminate. The LCD Display will show the Pizza
Function, the countdown time and the selected
temperature. The unit will begin to work and the
timer will start counting down.
When the Pizza function cycle is complete, the unit
will emit 3 beeps. The LCD and the Start/Cancel
Button Light will turn off after 30 seconds.
" button once to turn off the
" Knob if you wish to
" Knob if you wish to increase
English-8
"
Figure 4