When the Warming cycle is complete, the unit will
emit 3 beeps. The LCD and the Start/Cancel Button
Light will turn off after 30 seconds.
NOTE: You can cancel the warming cycle at any time by
pressing the Start/Cancel Button once. The red
Start/Cancel Button light will turn off whenever
a function has been completed or a function is
manually cancelled.
USING THE DEFROST FUNCTION (SEE FIG. 10)
Step 1. Turn the "Function" Knob to the Defrost " "
function.
Default Temperature: 230°C.
Default Time: 16 minutes.
You may manually activate the Turbo Convection
Heat by pressing the Turbo "
it on. The blue light of the Turbo button will turn on.
Step 2. To set the temperature:
Turn the Temperature "
increase or decrease the temperature setting. For
the Defrost function, the temperature can be set
from 65°C to 230°C in 1-degree increments.
Step 3. To set the time:
Turn the Time "
decrease the defrosting time. The maximum time
setting for Defrost is 60 minutes (1 hour). Once you
have selected the desired defrosting time, press the
Start button to initiate the cooking process.
Step 4. To Start:
Press the "Start/Cancel" Button to start the
defrosting process. The red Start/Cancel Button
light will illuminate. The LCD Display will show the
Defrosting function, the countdown time and the
selected temperature. The unit will begin to work
and the timer will start counting down.
When the Defrosting cycle is complete, the unit will
emit 3 beeps. The LCD and the Start/Cancel Button
Light will turn off after 30 seconds.
" button once to turn
" Knob if you wish to
" Knob if you wish to increase or
English-14
Figure 10