Technical Data - TREND T18S Traduction Des Instructions Originales

EN – T18S/R14
Thank you for purchasing this Trend product, we hope
you enjoy many years of creative and productive use.
Please remember to return your guarantee card within 28
days of purchase.

TECHNICAL DATA

Voltage
Battery type
Plunge carriage stroke
Collet size UK & Eire
Collet size Europe
No load speed
Plunge base cutter diameter max.
Trim base Cutter Diameter max.
Plunge base Weight
Trim base Weight
Battery*
Capacity of the battery
Charger*
Input voltage
Mains frequency
Output voltage
Output current
Charge time T18S/BA2A**
Charge time T18S/BA4AM**
Charge time T18S/BA5A**
* only for models equipped with
battery and charger
** charging time applies only to
the battery with a capacity listed
in table
Noise values and vibration values
(triax vector sum) according to EN
62841-2-17
Emission sound pressure level L
(uncertainty for the given sound pressure) K
Sound power level L
WA
(uncertainty for the given sound pressure)K
Vibration emission Value ah =
Uncertainty K =
VDC 18
Li-Ion
mm 60
mm 6.35 (1/4-inch)
mm 8
min-1 10,000 –
30,000
mm 38.1
37.2
kg 2.25
1.36
Ah 2
Ah 4
Ah 5
V 220 - 240
Hz 50/60
V 21
A 6
min 32
min 48
min 54
dB(A) 92.7
pA
3
pA
dB(A) 103.7
3
WA
m/s
2
2.549
1.5
EN - T18S/R14
The vibration and/or noise emission level given in this
information sheet has been measured in accordance
with a standardised test given in EN62841 and may be
used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
WARNING:
level represents the main application of the tool.
However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration
emission may differ.
This may significantly increase the exposure level over
the total working period. An estimation of the level of
exposure to vibration should also take into account the
times when the tool is switched off or when it is running
but not actually doing the job. This may significantly
reduce the exposure level over the total working
period. Identify additional safety measures to protect
the operator from the side effects of vibration such as:
maintain the tool and the accessories, keep hands warm,
organisation of work patterns.
EC DECLARATION OF CONFORMITY
MACHINERY DIRECTIVE
CORDLESS ROUTER
T18S/R14
Trend declares that the product described under
Technical Data is in compliance with 2006/42/EC, and
has been designed in accordance with
EN 62841-1:2015, EN 62841-2-17:2017
These products also comply with Directive 2014/30/EU
and 2011/65/EU. For more information please contact
Trend at the following address or refer to back of manual.
The undersigned make this declaration on behalf of
Trend Tool Technology Ltd.
Trend Tool Technology Ltd
Odhams Trading Estate,
Watford, WD24 7TR,
England
01/08/2021
-11-
The declared vibration emission
Neil McMillan
Technical Director
Technical File Contact
Trend Tool Technology Ltd
3rd Floor, Kilmore House,
Park Lane, Spencer Dock,
Dublin 1, Ireland