Intended Use; Assembly And Adjustments - TREND T18S Traduction Des Instructions Originales

ITEMS ENCLOSED
1 x Router body
1 x Router plunge base
1 x Router trim base
1 x Collet ¼-inch (6.35mm) UK, 8mm Europe
1 x Plunge base side fence
1 x Trim base side fence
1 x Line up cone and pin
1 x Guide bush 16mm
1 x Spanner
1 x Dust spout for plunge base
1 x Dust spout for trim base
1 x 4Ah slimline battery (not Body only models)
1 x Charger 6A (not Body only models)
1 x Tough Protective Case
NOTE: Battery packs, chargers and kit boxes are not
included with B models.
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
• Take the time to thoroughly read and understand this
manual prior to operation.
MARKINGS ON TOOL
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Wear hand protection.
Date Code Position
The year of manufacture is on the rating plate.
DESCRIPTION OF PARTS - (Fig. 1)
A. On / Off button
B. Lock button
C. Variable speed dial
D. Motor body
E. Motor body rack
F. Collet
G. Tough Protective Case
H. Spindle lock button
I. Spindle
J. Work lights
K. Battery port
L. Plunge base plunge locking lever
M. Plunge base
N. Plunge base side fence knobs
O. Plunge base turret stop
P. Plunge base depth stop
Q. Depth stop micro adjustment knob
EN - T18S/R14
R. Depth stop indicator
S. Depth stop locking knob
T. Depth stop scale
U. Plunge base body clamp
V. Plunge base side handles
W. Plunge base slider
X. Plunge base fixing screws
Y. Plunge base parallel side fence
Z. Trim base
AA. Trim base body clamp
BB. Trim base slider
CC. Trim base pinion and knob
DD. Trim base slider fixing screws
EE. Trim base parallel side fence
FF. Trim base parallel side fence locking knob
GG. Guide bush centring pin ¼-inch/8mm
HH. Guide bush centring cone
II. Collet nut spanner
JJ. Guide bush 16mm
KK. Guide bush fixing screws
LL. Plunge base dust spout
MM. Trim base dust spout
NN. Trim base dust spout knob
OO. Battery (not Body only models)
PP. Charger (not Body only models)

INTENDED USE

This cordless sander has been designed for sanding
wood, metal, plastics and painted surfaces.
DO NOT use under wet conditions or in the presence of
flammable liquids or gases.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators
use this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons
(including children) suffering from diminished physical,
sensory or mental abilities; lack of experience,
knowledge or skills unless they are supervised by a
person responsible for their safety. Children should
never be left alone with this product.

ASSEMBLY AND ADJUSTMENTS

WARNING:
personal injury, turn tool off and disconnect
battery pack before making any adjustments or
removing/ installing attachments or accessories.
An accidental start-up can cause injury.
WARNING:
and chargers.
-19-
To reduce the risk of serious
Use only Trend battery packs