Uk Declaration Of Conformity; General Power Tool Safety Warnings - TREND T18S Traduction Des Instructions Originales

UK DECLARATION OF
CONFORMITY
The undersigned, representing the following
manufacturer
Manufacturer:
Trend Tool Technology Ltd, Watford, England WD24 7TR
declares that the product(s):
Product Identification:
Product: Cordless Router
Brand: Trend
Model: T18S/R14
Conforms to the following UK Regulations
• The Supply of Machinery (Safety) Regulations, 2008,
S.I. 2008/1597 (as amended).
• Electromagnetic Compatibility Regulations, 2016, S.I.
2016/1901 (as amended)
and the following designated standards:
BS EN 55014-1:2017+A11:2020
BS EN 55014-2-2015.
• The Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment
Regulations 2012, S.I. 2012/3032 (as amended).
and the following Designated Standards:
S.I. 2008/1597: EN 62841-1:2015
EN 62841-2-17:2017
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
Trend Tool Technology Ltd.
Trend Tool Technology Ltd,
Odhams Trading Estate,
Watford, WD24 7TR,
England
01/08/2021
WARNING:
To reduce the risk of injury, read
the instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and pay
attention to these symbols.
DANGER:
Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
EN - T18S/R14
Neil McMillan
Technical Director
-12-
WARNING:
Indicates a potentially hazardous
situation which, if not avoided, could result in death or
serious injury.
CAUTION:
Indicates a potentially hazardous
situation which, if not avoided, may result in minor or
moderate injury.
NOTICE:
Indicates a practice not related
to personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING:
Read all safety warnings,
instructions, illustrations and specifications
provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury.
SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE
REFERENCE
The term "power tool" in the warnings refers to your
mains- operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work Area Safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause you to
lose control.
2) Electrical Safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.