Publicité
Les langues disponibles
Les langues disponibles
OPERATION
NOTE: NEVER LEAVE AN OPERATING UNIT UNATTENDED
With the Power Knob or Power Button in the OFF (
120V outlet. DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will only fit one way.
The ThermaWave Ceramic Heater is versatile and designed to be placed in the center of the room or closer
to the wall (at least 3 feet away) for maximum convection room heating.
Model HZ-850 Series - ThermaWave Ceramic Heater Operation
The Power Knob is equipped with two (2) heat settings:
1)
Low (
) – this setting uses 900 watts of power
2)
High (
) – this setting uses 1500 watts of power
Turn heater on by turning the Power Knob to either Low
(
) or High (
). The amber Power Light will come on.
Because the Low (
) setting does not require as much
electricity to operate, it is more energy efficient. This may be
a better option if you are concerned about saving energy.
To set the Thermostat, turn the Thermostat Control fully
clockwise to the highest (
) setting.
When the room reaches a comfortable temperature, slowly
turn the Thermostat Control counter-clockwise until both the
heating element and fan go off (the amber Power Light will
remain on). This is the point at which the Thermostat setting equals the room temperature. At this setting,
the Thermostat will automatically turn the heater back on and then off as needed to maintain the selected
temperature.
Turn the Power Knob to OFF (
) and unplug the heater when you are finished using it.
4
or
) position, plug the heater into a polarized
Model HZ-850
Power Knob
Power Light
Thermostat
Control
OPERATION
(CONTINUED)
Model HZ-860 Series - EnergySmart
Ceramic Heater Operation
Turn heater on by pressing ON (
) button.
The heater will default to the Constant HI
mode and the Current Temp Indicator will
display the current room temperature.
The Energy Usage Indicator will display the
power consumption used by the heater.
The Energy Usage Indicator will display
STAND BY when the heater has reached the
Desired Room Temperature. At this point,
the heater is most efficient and is drawing
only a few watts of energy while in STAND
BY mode.
Energy Usage Indicator Status:
• If HI, the heater is drawing 1500 watts
to quickly warm the room
• If LO, the heater is drawing 900 watts
to slowly warm the room or maintain
the temperature
• In STAND BY, the heater is drawing
no power as the room has reached
the Desired Temperature
To set the heater, the digital control
is equipped with two (2) continuous
heat modes:
1. For Continuous Low, press (
);
this setting uses 900 watts of power
2. For Continuous High, press (
);
this setting uses 1500 watts of power
NOTE: Because the Low (
) setting does
not require as much electricity to operate,
it is more energy efficient and may be a
better option if you are concerned about
the amperage draw on a circuit when the
heater is on the High (
) setting.
®
ThermaWave
Model HZ-860
Energy Usage
Indicator
EnergySmart
®
Thermostat
Mode
Power
Light
Power Button
Model HZ-860C Canada
Energy Usage
Indicator
EnergySmart
®
Thermostat
Mode
Power
Light
Power Button
Current
Temp
Indicator
Continuous
Heat Mode
Current
Temp
Indicator
Continuous
Heat Mode
5
Publicité
