About This Document; General Safety Precautions - STEINEL L 605 S Mode D'emploi

GB

1. About this document

– Under copyright. Reproduction either
in whole or in part only with our
consent.
– Subject to change in the interest of
technical progress.
2. General safety
precautions
Failure to observe these
!
operating instructions
presents hazards!
These instructions contain important
information on the safe use of this
product. Particular attention is drawn to
potential hazards. Failure to observe this
information may lead to death or serious
injuries.
• Read instructions carefully.
• Follow safety advice.
• Keep instructions within easy reach.
– Working with electrical current may
produce hazardous situations.
Touching live parts can result in
electrical shock, burns or death.
– Work on mains voltage must only
be performed by qualified, skilled
personnel.
– National wiring regulations and
electrical operating conditions must
be observed (e.g. DE: VDE 0100,
AT: ÖVE­ÖNORM E8001­1,
CH: SEV 1000).
– Only use genuine replacement parts.
– Repairs must be made by specialist
workshops.
3. L 605 S, L 605
Proper use
– LED sensor­switched light for indoor
and outdoor wall mounting.
– The sensor variants (S variants)
additionally contain an infrared sensor
for motion detection.
Non-intended use
– The sensor LED spotlight is not
dimmable.
Not dimmable
Operating principle motion detection
– The integrated infrared sensor
detects the heat radiated from
moving objects (e.g. people, animals).
– The heat detected in this way is
converted electronically into a signal
that switches the LED light ON
automatically.
– The most reliable way of detecting
motion is to install the light with the
sensor aimed across the direction in
which a person would walk.
– Reach is restricted when the sensor
is approached head on.
– Obstacles (e.g. trees, walls etc.)
interrupt the line of sensor vision.
– Heat radiation is not detected
through obstacles (e.g. walls or
panes of glass), the sensor is not
triggered.
– Sudden fluctuations in the tempera­
ture due to changes in weather are
not distinguished sources of heat.
Package contents (Fig. 3.1, 3.2)
Product dimensions (Fig. 3.3, 3.4)
14