STEINEL L 605 S Mode D'emploi page 15

Product parts (Fig. 3.5, 3.6)
A LED light
Clip
B
C Connecting terminal
D Wall mount
E Sensor unit (only S)
F Time setting (only S)
Twilight setting (only S)
G
H Programme setting (only S)
Luminous intensity distribution
(Fig. 3.7)
Wiring diagram (Fig. 3.8)
The supply lead is a three­core cable:
L = phase conductor (usually black,
brown or grey)
N = neutral conductor (usually blue)
= protective­earth conductor
(green/yellow)
A mains switch for switching the product
ON and OFF may be installed in the
mains supply lead.
Important: The light source of this
luminaire is not replaceable; if the light
source needs to be replaced (e.g. at
the end of its life), replace the complete
luminaire.
Technical specifications
– Dimensions (H × W × D):
– Power supply: 220 - 240 V, 50/60 Hz
– Power consumption (P
– Standby (P ) (Sensor):
sb
260 × 78 × 131 mm
): 11.3 W
on
L605 S: 0.50 W
– Luminous flux:
– Efficiency:
– Light temperature:
– Colour­rendering index:
– Rated average lifetime:
L70B50 at 25°C: 36,000 hrs
– Colour consistency SDCM:
– Luminous intensity distribution:
– Sensor technology:
– Angle of coverage:
– Detection reach:
– Mounting height:
– Twilight setting:
– Night light:
– Time setting: L605 S: 5 sec - 15 min
– Ambient temperature: -10°C to +40°C
– IP rating:
– Protection class:
– Energy efficiency class:
This product contains a light source
of energy efficiency class „E".
4. Installation
Hazard from electrical power.
Touching live parts can result in electrical
shock, burns or death.
• Switch OFF power and interrupt
power supply.
15
729 lm
64.5 lm/W
3,000 K (warm white)
R
a
Initial value: 6
202101051244_L605.ldt
LumEdit
150° 180°
120°
90°
20
40
60
60°
80
100
30° 0°
C0 / C180
cd / 1000 lm
08.03.21 / 11:02
L605 S: passive infrared
L605 S: 180°
L605 S: 10 m tangential
L605 S: 10 - 2,000 lux
L605 S: 10%
GB
= 82
Polar Diagram
150°
120°
90°
60°
30°
C90 / C270
1/1
2 m
IP44
I