Chauvet Professional COLORado 2 Solo Guide De Référence Rapide page 4

EN
Passcode
After being prompted, enter the following passcode by pressing:
<UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
This passcode cannot be changed and must be used whenever prompted.
Menu Map
Main Level
STATIC
ADDRESS
AUTO
PROGRAM
RUN MODE
ZOOM MODE
PERSONALITY
EDIT PROGRAM 1-10
3
QUICK REFERENCE GUIDE
Programming Levels
RED
GREEN
BLUE
WHITE
ZOOM
STROBE
001-512
AUTO 1-10
PROGRAM 1-10
DMX
SLAVE
ZOOM MODE 1
ZOOM MODE 2
HSIC
SSP
TOUR
TR16
STD.Y
SCENE-
01-30
STROBE
Combines red, green, blue, and white
to make a custom color
(0–100%)
0-255
Changes the beam angle (zoom)
Selects the strobe
frequency (0–25 Hz)
Sets the DMX starting address
Selects automatic programs and auto
SPEED 0-255
program speed
Selects customizable programs
Receives DMX signals from the DMX
controller
Receives DMX signals from the master
Normal operation
Recommended for use Below 40 °F
9-channel: H/S/CCT control, dimmer,
strobe, zoom, zoom reset, dimmer
speed
9-channel: R/G/B/W, dimmer, strobe,
zoom, zoom reset, dimmer speed
12-channel: R/G/B/W, dimmer, strobe,
color macro, auto/custom, dimmer
speed, auto speed, zoom, zoom reset
17-channel: 16-bit RGBW and dimmer;
strobe, color macro, auto/custom,
dimmer speed, auto speed, zoom,
zoom reset
17-channel: 16-bit RGBW and dimmer;
strobe, color macro, auto/custom,
dimmer speed, auto speed, zoom,
zoom reset
RED
Combines red, green, blue, and white
GREEN
to make a custom color
BLUE
(0-100%)
WHITE
0-255
ZOOM Changes the beam angle (zoom)
Selects the strobe frequency (0–20 Hz)
TIME Defines the step duration (slow to fast)
FADE Defines the fade duration (slow to fast)
Description
COLORado 2 Solo QRG Rev. 1