Elipson IC4 Mode D'emploi page 21

Masquer les pouces Voir aussi pour IC4:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Note : The flange of the speaker is designed to flex and conform to any small imperfections
in the wall surface. Tighten the 6 screws on the front of the baffle only enough to make
the flange become snug against the ceiling or wall. As you tighten the screws, the feet will
automatically flip into an outward position, thereby clamping the drywall between the feet
and the flange.
Caution : Over-tightening may warp the baffle, crack the wall, cause the flange to distort,
and make the grill difficult to install.
4. Secure the grill into place.
Note : The speaker flange incorporates high strength magnets to secure the grill into place.
Simply line the grill with the speaker flange.
V. PAINTING INSTRUCTIONS
The grills can be painted. However, great care should be taken not to clog the holes, as this
will severely reduce the sound quality of the speakers.
If you plan to paint your grills, it should be done before the installation. The scrim cloth
backing must be removed prior to painting the grills. The surface should be cleaned with a
light solvent to remove any dust or residue. Elipson recommends a light spray-painting using
5 parts thinning agent to 1 part paint. Do not paint the grill while they
are attached to the speaker.
21

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ic6Ic6stIc8Ic8 ultra slimIw6Iw8 ... Afficher tout

Table des Matières