Table des Matières
Publicité
Main modes
Energy saving
• Use this mode to switch the appliance to energy-saving
operation.
How to operate
Procedure
Display
1
Press enter key.
2
Press icon.
Current setting
3
Press icon again.
The setting is changed.
• ON / OFF switches in the order by pressing the icon.
4
Press enter key.
• While this mode is operating, the temperature inside
of the refrigerator and freezer compartment becomes
higher than the normal operation as follows. The
displayed temperature is not be changed.
Freezer
Under "Energy
saving" mode
Approx. 2°C plus
• Cancel this mode if you feel the beverages are not
cooled enough or ice making takes longer time.
Note
•
temperature, frequency of opening the doors, amount of
food).
Tips for saving energy
• Install the refrigerator in a well-ventilated area and keep
the space to ventilate.
• Keep your refrigerator out of direct sunlight and do not
place it next to heat generating appliance.
• Avoid opening the door as much as possible.
• Hot food should be cooled before storing.
• Place the food evenly on the shelves to allow the cool
All manuals and user guides at all-guides.com
• Use this mode when going on a trip or leaving the house
• The temperature inside the refrigerator compartment is
How to operate
Note
• Food storage period in the refrigerator compartment
Refrigerator
Approx. 1°C plus
• Temperature of refrigerator compartment cannot be
• The amount of energy consumption of this model is
Vacation mode
for a long time.
adjusted to approx. 10°C.
Procedure
Display
1
Press enter key.
2
Press icon.
Current setting
3
Press icon again.
The setting is changed.
• ON / OFF switches in the order by pressing the icon.
4
Press enter key.
becomes approx. 1/2-1/3 of normal operation.
Use this mode only when there is no perishable food.
measured as shown in the picture below.
90mm
300mm
300mm
< Standby display >
50mm
11
Publicité
Table des Matières
