Auto Volume; Night Mode; Mp3 Player; Play Music Via Bluetooth - Philips Fidelio Manuel D'utilisation

Masquer les pouces Voir aussi pour Fidelio:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Auto volume

Turn the auto volume on to keep the volume
constant when you switch to a different source.
It also compresses the sound dynamics,
increasing the volume for quiet scenes and
decreasing the volume for loud scenes.
1
Press AUTO VOL. to turn auto volume on
or off.
» When auto volume is turned on, ON
AUTO scrolls once on the display
panel.
» When auto volume is turned off, OFF
AUTO scrolls once on the display
panel.
Synchronize video and sound
If the audio and video are not synchronized,
delay the audio to match the video.
1
Press AUDIO SYNC +/- to synchronize
the audio with the video.
AUDIO SYNC + increases the sound
delay, and AUDIO SYNC - decreases
the sound delay.

Night mode

For quiet listening, night mode decreases the
volume of loud sounds when audio is played.
Night mode is only available for Dolby Digital
soundtracks.
1
Press NIGHT to turn night mode on or
off.
» When night mode is turned on, ON
NIGHT scrolls once on the display
panel.
» When night mode is turned off, OFF
NIGHT scrolls once on the display
panel.
Note
If auto volume is set to turned on, you cannot enable
the night mode.
B5_37_UM_V1.0.indb 15

MP3 player

Connect your MP3 player to play your audio
ÀOHV RU PXVLF
What you need
An MP3 player.
A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO IN
connector on your SoundBar.
2
Press AUDIO IN.
3
Press the buttons on the MP3 player to
VHOHFW DQG SOD\ DXGLR ÀOHV RU PXVLF
On the MP3 player, it is recommended
to set the volume in the range of 80%
maximum volume.

Play music via Bluetooth

Through Bluetooth, connect the SoundBar with
your Bluetooth device (such as an iPad, iPhone,
L3RG WRXFK $QGURLG SKRQH RU ODSWRS  DQG WKHQ
\RX FDQ OLVWHQ WR WKH DXGLR ÀOHV VWRUHG RQ WKH
device through your SoundBar speakers.
What you need
A Bluetooth device which supports
%OXHWRRWK SURÀOH $'3 DQG ZLWK %OXHWRRWK
version as 2.1 + EDR.
The maximum operational range between
the SoundBar and a Bluetooth device is
DSSUR[LPDWHO\  PHWHUV  IHHW 
Note
The music streaming may be interrupted by obstacles
between the device and this product, such as wall,
metallic casing that covers the device, or other devices
nearby that operate in the same frequency.
If you want to connect this product with another
Bluetooth device, break the current Bluetooth
connection.
EN
15
7/31/2015 5:22:55 PM

Publicité

Table des Matières
loading

Table des Matières