Connect And Set Up; Charge Portable Speakers; Pair Up With Subwoofer/Speakers; Pair Up With The Subwoofer - Philips Fidelio Manuel D'utilisation

3 Connect and set
up
This section helps you connect your SoundBar
to a TV and other devices, and then set it up.
For information about the basic connections of
your SoundBar and accessories, see the quick
start guide.
Note
•
)RU LGHQWLÀFDWLRQ DQG VXSSO\ UDWLQJV VHH WKH W\SH SODWH
at the back or bottom of the product.
•
Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.

Charge portable speakers

If the portable left/right speaker is undocked
from the main unit, its battery level is indicated
by the LED on the speaker.
• Light up white: full battery or more than
30% capacity remaining
• Light up red: low battery level, less than
30% remaining
• Flash red: near empty, less than 10%
remaining
1
Dock your portable speakers into the main
unit to charge.
2
Turn on the main unit.
» During charging, the LED on the
portable speaker lights up orange.
8 EN
B5_37_UM_V1.0.indb 8
» When fully charged, the LED on the
portable speaker lights up white for 10
seconds.
Note
•
It may take around two hours to fully charge the
portable speakers.
•
Battery performance varies due to many factors
including volume, sound setting and media played.
Pair up with subwoofer/
speakers
The wireless speakers and subwoofer
automatically pair up with the SoundBar for
wireless connection when you turn on the
SoundBar, the portable speakers and the
subwoofer.
If no audio from the wireless speakers and
subwoofer can be heard, manually pair up the
portable speakers and the subwoofer.

Pair up with the subwoofer

1
Turn on the SoundBar and the subwoofer.
» If the connection to the SoundBar is
lost, the indicator on the subwoofer
blinks white slowly.
2
Press the CONNECT FRQQHFW EXWWRQ RQ
the subwoofer to enter the pairing mode.
» The indicator on the subwoofer blinks
white quickly.
3
In OPTICAL mode (press OPTICAL 
within six seconds, on the remote control,
press twice then Volume + once, and
then hold down BASS +.
» If the pairing succeeds, the indicator on
the subwoofer lights up white.
» If the pairing fails, the indicator on the
subwoofer blinks white slowly.
4
If the pairing fails, repeat the steps above.
7/31/2015 5:22:54 PM