Whirlpool W84TE 72 X AQUA Mode D'emploi page 11

Drink cool mode
How would it be used?
• This mode is used to cool the drinks within adjustable time.
During this mode:
• Press freezer button for 5 seconds.
• Special animation will start on freezer set value screen and 05 will blink on
• cooler set value screen.
• Press cooler button to adjust the time (05 - 10 - 15 - 20 - 25 - 30 minutes).
• When you select the time the numbers will blink 3 times on screen and sound beep
beep.
• If no button is pressed within 2 seconds the time will be set.
• The countdown starts from the adjusted time minute by minute.
• Remaining time will blink on the screen.
• To cancel this mode press freezer set button for 3 seconds.
Function of Child lock
How would it be used?
• To prevent children from playing with the buttons and changing the settings you have
made, child lock is available in the appliance.
Activating Child Lock
• Press on Freezer and Cooler buttons simultaneously for 5 seconds.
During this mode:
• Press on Freezer and Cooler buttons simultaneously for 5 seconds.
Note: Child lock will also be deactivated if electricity is interrupted or the fridge is
unplugged.
Screen saver mode
How to use?
• This mode will be activated when you press on mode button for 5 seconds.
• If no button is pressed within 5 seconds when he mode is active, lights of the control
panel will go off.
• If you press any button when lights of control panel are off, the current settings will
appear on the screen, and then you can maket he adjustment as you want. If you
neither cancel screen saver mode nor press on any button in 5 seconds, the control
panel will go off again.
• To cancel screen saver mode press on mode button for 5 seconds again.
• When screen saver mode is active you can also activate child lock.
• If no button is pressed within 5 seconds after child lock is activated, the lights of the
control panel will turn off. You can see latest status of settings or modes after you pres
any button. While control panel 's light is on, you can cancel child lock as described in
the instruction of this mode.
Door open alarm function
If cooler or freezer door is opened more than 2 minutes , appliance sounds 'beep beep'.
Cooler temperature settings
• Initial temperature value for Cooler Setting Indicator is +4 °C.
• Press cooler button once.
• When you first push this button, the last value appears on the setting indicator of the
cooler.
• Whenever you press on this button, lower temperature will be set. (+8°C, +6°C, +5°C,
+4°C, +2°C, supercool)
• When you push the cooler set button until supercool symbol appears, and if you do not
push any button in 1 seconds Super Cool will flash.
• If you continue to press, it will restart from +8°C.
• The temperature value selected before Holiday Mode, Super Freeze Mode, Super
Cool Mode or Economy Mode is activated will remain the same when the mode is over
or cancelled. The appliance continues to operate with this temperature value.
EN - 11