JVC RX-DP20VBK Manuel D'instructions page 73

One-Touch DVD Play
Simply by starting playback on the DVD player, you can enjoy the
DVD playback without setting other switches manually.
When you press PLAY on the remote control supplied for this
receiver for operating the DVD player, the receiver automatically
turns on and changes the Zone 1 source or Zone 2 source,
depending on the ZONE 1/ZONE 2 (LEARN/TRANSMIT) selector
setting on the remote control, to the appropriate input—"DVD" or
"DVD MULTI" as the Zone 1 source, and "DVD" as the Zone 2
source.
For Zone 1 operations: The Zone 1 TV automatically turns on and
changes the input mode to the appropriate position so that you can
view the playback picture.
• When the DVD player is connected through the analog input jacks
on this receiver (and analog input is selected), the receiver
automatically turns on and changes the source to "DVD" or "DVD
MULTI."
– If the receiver is already turned on with the ZONE 2 ON/OFF
lamp on the unit lit, and Zone 2 source name is shown on the
display, the receiver changes the Zone 2 source to "DVD." In
this case, the Zone 2 TV will not turn on.
• When the DVD player is connected through the digital input
terminal on this receiver (and digital input is selected), the
receiver automatically turns on and changes the Zone 1 source to
"DVD."
– If the receiver is already turned on with the ZONE 2 ON/OFF
lamp on the unit lit, and Zone 2 source name is shown on the
display, the receiver changes the Zone 2 source to "DVD." (If
no analog connection is made for the DVD player, no sound
comes out of the Zone 2 front speakers).
Automatic Selection of TV's Input Mode (Only for Zone 1
Operations)
• When you select "TV" as the Zone 1 source to play on the
receiver, the Zone 1 TV automatically changes the input mode to
the TV tuner so that you can watch the Zone 1 TV.
• When you select "DVD," "DVD MULTI," "VCR 1," "VCR 2,"
"VIDEO" or "DBS" as the Zone 1 source to play on the receiver,
the Zone 1 TV automatically changes the input mode to the
appropriate position (either Video Input 1 or Video Input 2) so that
you can view the playback picture.
Notes:
• When you select "TV" as the source on the receiver, you cannot
see the menu on the TV screen since the AV COMPU LINK remote
control system automatically changes the TV's input mode to the
TV tuner.
If you do not mind stopping listening to the TV sounds, you can
then show the on-screen displays after changing the TV's input
mode to the appropriate position (either Video Input 1 or Video
Input 2) the receiver is connected to.
• This function does not work when you connect this receiver and the
TV with the AV COMPU LINK EX terminal using the component
video cables. To use this function, connect this receiver and the TV
using the S-video or composite video cables.
Automatic Power On/Off (Standby)
Automatic Power On:
The Zone 1 TV, VCR 1 (the VCR connected to the VCR 1 jacks),
and DVD player turn on and off along with the receiver.
• When you turn on the receiver by pressing
ON) on the front panel, or AUDIO (ON) on the remote
control with the ZONE 1/ZONE 2 (LEARN/TRANSMIT)
selector set to "ZONE 1":
When you turn on the Zone 1 sound by pressing
ZONE 1 ON/OFF while the receiver is turned on:
The ZONE 1 ON/OFF lamp on the unit lights up and the source
name for Zone 1 appears on the display, and;
– If the previously selected Zone 1 source is "VCR 1," the Zone 1
TV and VCR 1 will turn on automatically.
– If the previously selected Zone 1 source is "DVD" or "DVD
MULTI," the Zone 1 TV and DVD player will turn on
automatically.
– If the previously selected Zone 1 source is "VIDEO," "VCR 2,"
"TV" or "DBS," only the Zone 1 TV will turn on automatically.
• When you turn on the receiver by pressing
AUDIO (ON) on the remote control with the ZONE 1/ZONE
2 (LEARN/TRANSMIT) selector set to "ZONE 2":
When you turn on the Zone 2 sound by pressing
ZONE 2 ON/OFF while the receiver is turned on:
The ZONE 2 ON/OFF lamp lights up, and —
– If the previously selected Zone 2 source is "VCR 1," the VCR 1
will turn on automatically.
– If the previously selected Zone 2 source is "DVD," the DVD
player will turn on automatically.
– If the previously selected Zone 2 source is "VIDEO," "VCR 2,"
or "DBS," nothing happens.
Automatic Power Off (Standby):
• When you turn off the receiver by pressing
ON) on the unit or AUDIO
control, the Zone 1 TV, VCR 1 and the DVD player will turn off
(standby).
• When you turn off the Zone 1 sound by pressing
ZONE 1 ON/OFF, the selected Zone 1 source component turns
off (unless the same component is selected as the Zone 2 source),
and the Zone 1 TV also turns off.
– If the ZONE 2 ON/OFF lamp is lit, nothing happens.
• When you turn off the Zone 2 sound by pressing
ZONE 2 ON/OFF, the selected Zone 2 source component turns
off (unless the same component is selected as the Zone 1 source).
– If the ZONE 1 ON/OFF lamp is lit, nothing happens.
Note:
If you turn off the receiver by pressing
unit or AUDIO (STANDBY) on the remote control, or if you turn off
the Zone 1 sound by pressing ZONE 1 ON/OFF while recording on
the VCR 1, the VCR 1 will not turn off, but continue recording.
(STANDBY/
OR
OR
(STANDBY/
(STANDBY) on the remote
(STANDBY/ON) on the
70