Superimposing The Menus-Superimpose; Showing The Text Information On The Display-Fl Display; Memorizing The Volume Level For Each Source-One Touch Ope - JVC RX-DP20VBK Manuel D'instructions

7 SPEAKER 2
When using the FRONT 2/ZONE 2 SPEAKERS terminals,
determine the speaker terminal usage:
SPEAKER 2 : Select to connect the second front speakers in
Zone 1.
ZONE 2 SPK : Select to connect the front speakers in Zone 2.
BI-AMP OUT : Select to connect the front speakers in Zone 1
using bi-amplifier connection*.
The BI-AMP indicator (as well as the front
speaker 1 indicator) will light up when the
front speakers 1 are activated.
Notes:
* If your speaker has two pairs of input terminal (one for the high
frequency range and the other for the low frequency range),
you can connect the speakers by using both the FRONT 1
SPEAKERS and FRONT 2/ZONE 2 SPEAKERS terminals on
the rear of this unit.
• When "BI-AMP OUT" is selected, the surround back speakers
are automatically deactivated. In this case, the SURR CH OUT
submenu cannot be adjusted (see page 42).
• When "BI-AMP OUT" is selected, "SURR BACK SP" is set to
"NONE" on the SPEAKER SETTING submenu (see page 38).
e Superimposing the Menus—SUPERIMPOSE
7 SUPERIMPOSE
Turn on or off superimpose:
ON : Select to superimpose the menus on the playback
pictures on the TV screen.
OFF : Select to cancel superimposition.
Menus will be shown on the blue background screen.
Notes:
• If a video component and this unit are connected only using
component cords, Superimpose will not work.
• While Superimpose is in use, the menus may fluctuate or may
be distorted depending on the playback pictures. In this case,
cancel superimpose by selecting "OFF."
You can select whether or not to
superimpose the menus on the
playback pictures on the TV
screen.
r Showing the Text Information on the
Display—FL DISPLAY
7 FL DISPLAY
Turn on or off the text information display.
TEXT : Text information appears during play.
NORMAL : Surround/THX/DSP mode appear during play.
Note:
Though you have selected "TEXT," the source name and
Surround/THX/DSP mode will appear while playing a disc that
has no text information.
t Memorizing the Volume Level for Each
Source—ONE TOUCH OPE
7 ONE TOUCH OPE
Select one of the following to store the volume level for each
source:
ON : Select to store the volume level setting separately for
each source. (The ONE TOUCH OPERATION
indicator lights up on the main unit's display.)
This receiver memorizes the volume level—
• when you turn on the power,
• when you change the source, and
• when you turn on One Touch Operation.
OFF : Select not to store the volume level setting.
To recall the volume level
With the ONE TOUCH OPERATION indicator lit, the volume
level for the currently selected source is recalled when the
source is selected.
To cancel the One Touch Operation
Set One Touch Operation to "OFF" so that the ONE TOUCH
OPERATION indicator goes off.
When you have connected an
MD recorder or CD player
equipped with the TEXT
COMPU LINK remote control
system (see page 63), you can
show text information, such as
disc title or track title, on the
display of this receiver.
This unit memorizes many
settings separately for each
source (see page 28).
In addition, you can store the
volume level for each source
together with the other
memorized settings.
44