Loss Of Data; Fan Speed; Theatrical Dimming; Dimmer Curve - Chauvet Professional MAVERICK MK2 SPOT Mode D'emploi

Operation

Loss of data

In case of an input signal being lost in any way, the Maverick MK2 Spot will respond in one of two ways:
The product will either hold the last signal received, or black out all LED output.
To set which way the product responds, follow the instructions below:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Loss of Data, or touch the display where it says Loss of Data.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Hold (hold last signal received) or Close
(black out all LED output), or touch the display where it says the desired option.
5. Press <ENTER>.

Fan speed

To set the speed of the fans, do the following:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Fans, or touch the display where it says Fans.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Auto (fan speed set according to product
temperature), Full (maximum speed), or ECO (quiet fan mode), or touch the display where it says
the desired option.
5. Press <ENTER>.

Theatrical dimming

To set legacy dimming to match older Maverick MK2 profiles, follow the instructions below:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Theatrical Dimming, or touch the display where it says
Theatrical Dimming.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select No (updated dimming), Yes (legacy
dimming will match older Maverick MK2 profiles), or touch the display where it says the desired
option.
5. Press <ENTER>.

Dimmer curve

To set the dimmer curve, follow the instructions below:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Dimmer Curve, or touch the display where it says Dimmer
Curve.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Linear, Square, I Square or SCurve, or
touch the display where it says the desired option.
5. Press <ENTER>.

Dimmer speed

To set the dimmer speed, do the following:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Dimmer Speed, or touch the display where it says Dimmer
Speed.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Smooth or Fast, or touch the display where
it says the desired option.
5. Press <ENTER>.
Maverick MK2 Spot User Manual Rev. 11
menu.
menu.
menu.
menu.
menu.
Page 19 of 189