English - Kenwood AT641 Mode D'emploi

Use the centrifugal juicer for
extracting juice from fruit and
vegetables.
before using your Kenwood
attachment
Read these instructions carefully and
G
retain for future reference.
Remove all packaging and any
G
labels.
safety
Do not use the juicer if the
G
filter basket is damaged.
The cutting blades on the base of
G
the filter basket are very sharp, take
care when handling and cleaning the
filter basket.
Only use the pusher supplied. Never
G
put your fingers in the feed tube.
Unplug before unblocking the feed
tube.
Before removing the attachment,
G
switch off and wait for the filter
basket to stop.
Switch off and unplug:
G
before fitting or removing parts
G G
before cleaning
G G
after use.
G G
Don't touch moving parts.
G
This machine will be damaged and
G
may cause injury if the interlock
mechanism is subjected to
excessive force.
Should excessive vibration occur
G
when using this attachment, either
adjust the speed or stop the
machine, unplug and clear any
blockage.
Refer to your main kitchen machine
instruction book for additional safety
warnings.
This appliance conforms to EC
G
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.

English

before using for the first time
1 Wash the parts: see 'Cleaning'.
key
pusher
feed tube
lid
filter basket
bowl
juice spout
interlocking latches
base unit
juice jug holder
release button for juice jug holder
juice jug and lid
pulp collector
to use your centrifugal
juicer
preparing food
Remove stones (plums, peaches,
G
cherries etc).
Remove tough skins (melons,
G
pineapples, cucumbers, potatoes
etc).
Soft-skinned and other foods just
G
need washing (apples, pears,
carrots, radishes, lettuce, cabbage,
parsley, spinach, grapes,
strawberries, celery etc).
Citrus peel - Peel and remove the
G
white pith, otherwise the juice may
be bitter. For best results we
recommend using the citrus juice
attachment which is available
separately.
assembly and use
Remove high speed outlet cover
G
before assembling unit.
1 Place the bowl onto the base unit so
that the juice spout fits into the
groove of the base unit.
2 Fit the filter basket into the bowl,
ensuring the M arrows on the
underside of the filter basket line up
with the M arrows on the top of the
base unit.
3 Fit the lid, ensuring that the lid
extension fits over the bowl lip.
2