Mitel SUPERCONSOLE 1000 Guide D'utilisation page 7

Addendum to the SX-200 EL/ML
SUPERCONSOLE 1000 User Guide
This section describes new SUPERCONSOLE 1000 features available in LIGHTWARE 17,
Release 4 and LIGHTWARE 18, Release 1.
Call Park - System (LW 17)
Parking a call is the same as placing it on hold except that the call is held by the system not
by the console Hold keys. When you park a call, the system assigns it to a parking orbit and
displays the Call Park Retrieve access code and the Park Orbit number. You can then use
paging to announce the call and the digits the paged party must dial to retrieve the call.
To park a call:
• Press the
[SYSTEM PARK]
To return to the caller if all Park Orbits are in use:
• Press
CANCEL
To retrieve a parked call:
• Dial the Call Park Retrieve access code followed by the Park Orbit number.
To re-park the call:
• Press the
[PARK AGAIN]
after you answer the call.
Last Call Retrieve (LW 17)
This feature allows you to recover a call you transferred to the wrong extension. The call must
still be ringing the original extension to be recovered.
To retrieve the last call transferred from the console:
• Press
CANCEL
:e\i :eY\\Ud"
softkey.
.
softkey. The
[PARK AGAIN]
.
9cceU FUbcY_^"
softkey is only available immediately
%