Mitel SUPERCONSOLE 1000 Guide D'utilisation page 6

1TTU^Te]d_dXUCH "
Using a SUPERSET™ PKM48 Module with the Console
Up to two SUPERSET PKM48 modules can be connected to the console. The keys on the
modules are programmed by your system administrator as Direct Station Select (DSS)/Busy
Lamp Field (BLF) keys. Each key has a lamp that indicates the status of the associated line or
extension.
When line/extension is:
Idle
Busy
Ringing
On Hold
Note: Using a PKM48 module with the console requires LIGHTWARE™ 18, Release 1 software.
The console supports the connection of either PKM48 modules or a printer; if both are connected
only one will function.
Powering the Console
The console features a back-lit LCD display for better viewing under a wide range of lighting
conditions. Power for the display is supplied by an AC adapter (included with the console). The
adapter also powers the console printer port and the optional PKM48 modules.
Use only a Mitel AC adapter (PN 700063020) to power the console.
!
$
5< =<Ce`UbS_^c_\U!
the indicator is:
Off
On
Slow Flash
Fast Flash
9cceU FUbcY_^"
EcUb7eYTU
:e\i :eY\\Ud"