emerio TFN-114513 Mode D'emploi page 5

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TFN-114513
DESCRIPTION OF PARTS
1. Control panel
2. Display panel
3. Fan body
4. Air outlet
5. Base
6. Remote control
CONTROL PANEL
1. Timer
2. Oscillation button
3. On/off button
4. Speed button
5. Mode
REMOTE CONTROL
This unit has a remote control. O ne piece of CR2025 battery will be provided with the remote control. Before
starting to use the remote control, remove the plastic protection from the battery. If you want to change the
battery, please refer to the instruction behind the remote control. If it is not in use for a long time, please take
the battery out of the remote control. The functions of the remote control buttons are the same as the functions
of the buttons on the control panel.
ASSEMBLY
1.
Take the rear base and the front base out of the package, match the poles and holes of the rear base and
the front base and join them together.
2.
Put the main body into the assembled base. Use the two screws (taken from the bottom of fan body) to fix
the connection of fan body and base.
3.
Arrange the power cord out through the cut at the base edge.
- 4 -
EN

Publicité

Table des Matières
loading

Table des Matières