Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation of the wall-fixing device:
Fit the Safety Center to the wall-fixing device.
Mark the two drill holes (distance 110 mm).
Drill two holes (8 mm drill) and fit the device
to the wall.
Lightly fasten the valve to the wall-fixing de-
vice. The distance between the valve and the
wall can be changed prior to tightening.
Tighten the lock nut
device.
Verify prior to installation whether the Safety
Center's stop valve is closed.
Thoroughly flush the pipes prior to installa-
tion!
The group can be mounted in horizontal and
vertical pipes.
Caution: Observe the correct direction of
flow marked with an arrow on the body.
in front of
the wall-fixing
3
Publicité
Table des Matières
