Preparing The Product For Use; Safety Precautions Before Use; Unpacking; Safely Disposing Of Packaging Material - Videotec MAXIMUS MBX Manuel D'instructions

5 Preparing the product for
use
Before carrying out any type of
intervention, read the Safety standards
chapter carefully in the product manual.

5.1 Safety precautions before use

If the device comes into contact with harsh
substances, it is the responsibility of the user to take
suitable precautions to prevent damage and not
compromise the type of protection.
• Aggressive substances: Acidic liquids or gases
that may attack metals, or solvents that may affect
polymeric materials.
• Suitable precautions: Regular checks as part
of routine inspections or establishing from the
material's data sheet that it is resistant to specific
chemicals.
It is the responsibility of the end users to make sure
that the materials used to build the product are
suitable for the intended installation site. If in doubt,
contact the manufacturer.
12

5.2 Unpacking

When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
When returning a faulty product we recommend
using the original packaging for shipping.
Keep the packaging in case you need to send the
product for repairs.
5.3 Contents
Check the contents to make sure they correspond
with the list of materials as below:
• Explosion-proof box
• O-ring replacement part kit, hexagon socket set
screws
• Instruction manuals
5.4 Safely disposing of packaging
material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
MNVCMBX_2222_EN