MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
2
Unpacking
–
–
–
–
MIC7000 packaging is designed:
–
–
Caution!
Take extra care lifting or moving MIC7000 cameras because of their weight (6.7 kg (14.7 lb)).
!
2.1
Parts List - Camera
One (1) MIC71xx or MIC72xx Camera
One (1) Quick Installation Guide
One (1) Document DVD
One (1) spanner tool [to remove and to attach the yoke caps in order to cant the camera if desired,
and to remove the access plug from the camera head when installing the optional illuminator
accessory (sold separately)]
One (1) base gasket
One (1) RJ45 coupler
Four (4) MAC address labels
One (1) ground screw
2.2
Additional Tools
The following table lists additional tools (not supplied by Bosch) that may be required to
install a MIC camera or its accessories:
1 Phillips-head screwdriver to secure the ground lug of the camera
1 Adjustable wrench or socket set to secure the base of the camera to mounting accessories
1 Torque wrench with 1/4 in. drive to use the spanner tool (supplied) for removing yoke caps and
blanking plugs if necessary
1 Torx driver, T27, to remove Torx bolts from yoke arms if canting the camera (optional)
Bosch Security Systems
This equipment should be unpacked and handled with care. Check the exterior of the
packaging for visible damage. If an item appears to have been damaged in shipment,
notify the shipper immediately.
Verify that all the parts listed in the Parts List below are included. If any items are
missing, notify your Bosch Security Systems Sales or Customer Service Representative.
Do not use this product if any component appears to be damaged. Please contact Bosch
Security Systems in the event of damaged goods.
The original packing carton is the safest container in which to transport the unit and must
be used if returning the unit for service. Save it for possible future use.
to allow installers to configure the camera inside the shipping box.
to provide a temporary table-top or desk-top stand.
Quick Installation Guide
Unpacking | en
11
2014.06 | 1.0 | F.01U.291.521