Battery Replacement; Fuse Replacement - Klein Tools MM300 Manuel D'instructions

BATTERY REPLACEMENT

When indicator is displayed on LCD, batteries must be replaced.
1. Remove screw from battery door.
2. Replace 2 x AAA batteries (note proper polarity).
3. Replace battery door and fasten securely with screw.

FUSE REPLACEMENT

A fuse may blow if more than 200mA is applied to the V jack
or more than 10A is applied to the 10A jack
1. Remove 6 screws from back of meter and remove back housing.
2. Replace blown fuse(s) with:
V ( A/mA) jack
10A jack
3. Replace back housing and fasten securely with screws.
200mA/600V
fast-blow fuse
(Klein Cat. No. 69031)
MAINTENANCE
: 200mA/600V fast-blow (Klein Cat. No. 69031)
5
: 10A/600V fast-blow (Klein Cat. No. 69032)
3
. To access fuses:
3
To avoid risk of electric shock,
disconnect leads from any voltage
source before accessing fuses.
To avoid risk of electric shock,
do not operate meter while back
housing is removed.
(Klein Cat. No. 69032)
To avoid risk
of electric shock,
disconnect leads from
any voltage source
before removing
battery door.
To avoid risk of
electric shock, do
not operate meter
while battery door
is removed.
10A/600V
fast-blow fuse
,
5
11