Activation Via Telephone Programmer - Perry Electric PER1CRCR022B Mode D'emploi

8 - ACTIVATION VIA TELEPHONE PROGRAMMER

8.1 - TELEPHONE PROGRAMMER OPERATING MODE
G The telephone programmer controls the chronothermostat by closing the
contact connected to terminals
B
connections).
Contact closed = control activated
Contact open = control not activated
When the chronothermostat is activated in:
manual or P 06 (count-down program)
programmer (contact closed), it switches to
(*) with "comfort" temperature.
The display will show the symbols for permanent manual operation and
forcing by telephone programmer.
( ) * note : if the chronothermostat is activated from the telephone programmer
in temporary manual mode
temperature until midnight, then switches to
"comfort" temperature .
Deactivation of telephone programmer forcing:
Open the telephone programmer contact (see programmer instructions) which
returns the chronothermostat to the operating mode selected when telephone
programmer control was activated.
Note: activating and deactivating controls are operational within one minute.
44
8 and 9 of the device (heading 4.4 - Electrical
temporary manual, permanent
mode by way of the telephone
"permanent manual operation"
, it retains this status, utilizing the "comfort"
permanent manual
t 1
.
0 2
R
/ DAY
PROG
utilizing the
DAY 2
ON
t1
t2
t3
4 6 8 10 12 14 16 18 20 22
°
C
/
½ h OK C
/
t