Perry Electric PER1CRCR022B Mode D'emploi page 35

5 - PROGRAMMING THE CHRONOTHERMOSTAT
5.4 - PROGRAMMING SUMMER - WINTER
The chronothermostat is factory-set for
Under these conditions the appliance (burner) will be activated as described in
the example:
Temperature set points:
t1 - Comfort = 20 °C
t2 - Working = 18 °C
t3 - Economy = 16,5 °C
t - Antifreeze = 5 °C
If the controlled appliance is an air conditioner: press the
"Summer" operation, displayed as:
conditioner) will be activated as described in the example:
Temperature set points:
t1 - Comfort = 20 °C
t2 - Working = 22 °C
t3 - Economy = 23,5 °C
In both cases the operation in use will be indicated by
temperature values can be changed.
5.5 - CHANGING HOUR, MINUTES, DAY OF THE WEEK
/
Press the button until the hour digits start blinking.
DAY
!
Change the hour (if necessary) by pressing the
!
Press OK to confirm: hour digits fixed, minutes digits blinking.
!
Change the minutes (if necessary) by pressing the
!
Press OK to confirm: minutes digits fixed, day indicator blinking.
!
Select the day of the week (if necessary) by pressing the
!
Press OK to confirm.
The chronothermostat returns to the program currently active.
"winter" operation, dispalyed as:
Burner operation with room temperature:
< 20 °C
< 18 °C
< 16,5 °C
< 5 °C
. In these conditions the appliance (air
Air conditioner operation with room temperature:
> 20 °C
> 22 °C
> 23,5 °C
blinking and the
/
DAY button.
/ button.
DAY
/
DAY
.
t
1
0 2
R
/
DAY PROG
/ button for
t
1
.
0 2
R
/ DAY
PROG
.
button.
0 2
R
/
DAY PROG
2
DAY
ON
t1
t2
t3
4 6 8 10 12 14 16 18 20 22
°
C
/
½ h
OK C /
2
DAY
ON
t1
t2
t3
4 6 8 10 12 14 16 18 20 22
°
C
/
½ h OK C
/
DAY 2
t1
t2
t3
4 6 8 10 12 14 16 18 20 22
°
C
/
½ h
OK C /
G
B
t
t
t
35