Operating The Appliance - Agrilution Plantcube Mode D'emploi

Operating the appliance

Before use

Before starting to use the appliance for the
first time, clean all surfaces on the inside of
the appliance using a damp cloth.
Connecting to the Agrilution app
48
Install the Agrilution app on your mobile de-
vice.
Here you can create your account and then
connect the Plantcube to your home network.
Switching on
Switching on the appliance
Plug in the mains plug, which will
automatically start running the appliance.
Connecting the Plantcube
To connect the Plantcube to your Wi-Fi, select
"Add Plantcube" and simply follow the steps
described in the app.
Should you lose connection to your Plantcube,
follow the steps suggested in the app or refer
to the "Troubleshooting" section.
1. Insert inlet filter

Carefully rinse out the inlet filter found in
the water tank every four weeks when chan-
ging the water or cleaning the entire appliance.

The inlet filter should be replaced every
three months; it is available to order from the
Agrilution shop.
2. Inserting the water tank

Ensure that the inlet filter has been inserted
in the tank before inserting the water tank.

Make sure that the water tank is inserted
below the side mark.

When it has been correctly inserted, the
tank can be tipped slightly forwards and back-
wards, as it sits on top of the valve. Ensure that
you press the tank firmly downwards.
EN
49