sYMBoLs
To reduce the risk of injury, user
must read instruction manual
Li-Ion battery. separate collection,
and battery must be recycled
Edging
Trimming
10
POSITEC Inc. has established
a partnership with the RBRC
Corporation to recycle any
Positec batteries with the
RBRC-call2recycle seal. For
environmental protection, please
do not discard batteries in the
trash. After the batteries' life
cycle is ended, then please call
1-800-822-8837 for a free service
that will properly dispose of the
battery.
12˝ Grass Trimmer/Edger
AssEMBLY
1. ASSEmBly oF THE mAiN HANdlE
(See Fig. A)
Align and insert the shaft into the upper
housing until a click can be heard. Make sure
the grooves are correctly matched (See Fig. A).
NoTE: make sure that the handle is
firmly locked in place. do not try to
remove these pieces after connecting.
2. ASSEmBly oF THE SAFETy GuARd
(See Fig. B1, B2)
Remove a screw from the guard; attach the
safety guard to the trimmer head. Align the
guard so it slides into the slots located on the
trimmer head. Turn the tool over and secure
the safety guard onto the trimmer head with
the screw (a) provided.
opErATIoN INsTrUCTIoNs
wARNiNG! The charger and battery pack
are specially designed to work together
so do not attempt to use any other devices.
Never insert or allow metallic objects into your
charger or battery pack connections because
of an electrical failure and hazard will occur.
1. BEFoRE uSiNG youR CoRdlESS
GRASS TRimmER
The battery pack included is shipped
UNCHARGED. You must charge before first
use.
The battery charger supplied was designed to
only charge the Li-Ion battery also supplied.
Do not use another battery charger.
2. CHARGiNG youR BATTERy PACk
The Li-Ion battery is protected against deep
discharging. When the battery is empty,
the machine will switch off by means of a
protective circuit: The trimmer head will no
longer rotate .
In a warm environment or after heavy use, the
battery pack may become too hot to permit
charging. Allow time for the battery to cool
down before recharging.
EN