Abus MODUVIS TVHS20 Serie Manuel D'utilisation page 86

4) Select the type of monitor you wish to configure.
Indoor station Type
Floor
Apartment no.
Indoor station:
The monitor acts as the main monitor for a home's door intercom system. It can be set up in
a single-family or multi-family home. The main monitor in a residence must always be set up
with the type "indoor station". If you only use one call button and one residence, the
apartment number will remain on "1". If multiple residences/main monitors are used, the
apartment numbers must be changed.
Example: Residence 1 => apartment number 1
Residence 2 => apartment number 2
(etc...)
This is the only way the call buttons can be assigned to different parties.
Note: A main monitor (indoor station) must always be linked to the main door station in the
system.
Interior extension:
The monitor is used as an extension monitor in a system to equip more rooms in a home. All
extension monitors are linked to the main monitor and display the same functions as the
main monitor when the call button is pressed.
You can link up to a maximum of 5 additional monitors to a main monitors. (No. 1-5). You
can also assign each monitor a "room name". The room names will automatically appear
under "Contacts" on the other monitors in the system.
Note: An extension monitor (indoor station) must always be linked to the main monitor in the
system.
The following menu items are not available on the monitor for the installation type "interior
extension". They can only be set/accessed on the system's main monitor:
• Switch "automatic acceptance" for answering machine on/off.
• Listen to answering machine messages
• ABUS LINK Station App – menu
• Add network cameras
• Configure network address and set factory settings on end devices
Wizard assistant 3/4
Indoor station
21
0
1