Configuration - Device Management - Abus MODUVIS TVHS20 Serie Manuel D'utilisation

Configuration – device management
5.2.4.3
Main door station
The function of this menu is different for the indoor station and interior extension. You can change
the device assignments here.
Attention:
The main monitor in a system must always be connected to the main video module.
An extension monitor in a system must always be linked to the main monitor in the system.
Indoor station:
Indoor extension:
The following interactions can also be carried out from this menu:
•
Set network parameters (DHCP, IP address etc.) for door stations
•
Reset door stations to factory settings
To add an ABUS network camera to the system, please click the "+" symbol at the top right under
"Add device".
Select "Private protocol" for ABUS cameras and assign a device name of your choosing. The IP
address of the camera in the network and the RTSP port (default 554) are also required for
connection. Then you still need to enter the username and password for your network camera.
The list of compatible ABUS network cameras can be found at www.abus.com.
Device Management
- Assigning the main door station
- Add other IP network cameras for a live view. To do this, click the "
symbol at the top right and select "Private protocol" for an ABUS network
camera.
- Assigning the indoor station (main monitor)
192.168.0.26
39
+ "