Switching Off The Alarm Signal; Snooze Function - Technoline WD 2000 Instructions D'utilisation

to set the minute of snooze you need.

Press "ALARM" button to confirm your
setting and to end the setting procedure
Notes:

After 20 seconds without pressing any
button the clock switches automatically
from setting mode to normal time display.

The alarm will sound for 2 minutes if you
do not deactivate it by pressing any but-
ton. In this case the alarm will be repeat-
ed automatically after 24 hours.

Rising alarm sound (crescendo, duration:
2 minutes) changes the volume 4 times
whilst the alarm signal is heard.

The snooze time setting range: 5 ~
60MIN, OFF, when set to OFF, means no
snooze function. Snooze time unit is
minutes.
272