Receiving Data; Receiving Outdoor Values - Technoline WD 2000 Instructions D'utilisation

Receiving data

Receiving outdoor values

After inserting the batteries, the transmitter auto-
matically starts transmitting the outdoor values to
the base station. The transmission is completed
after approximately one minute.
If the base station cannot receive the outdoor
values, "- -" appears on the display.
1. Check the batteries and try again. Note that
you must always insert the batteries in the
transmitter and receiver within one minute for
the restart.
2. Avoid close proximity to solid metal objects and
other electrical devices (televisions, computers,
radio telephones).
3. Change the distance between the transmitter
and receiver (free-field range max. 50 metres,
262