Nacon REVOLUTION UNLIMITED Mode D'emploi page 8

EN /
The profile LEDs will show you the battery level as below :
- 75% < Battery level ≤ 100%: 4 profile LEDs are ON
- 50% < Battery level ≤ 75%: 3 profile LEDs are ON (1st, 2nd and 3rd LEDs)
- 25% < Battery level ≤ 50%: 2 profile LEDs are ON (1st and 2nd LEDs)
- 10% < Battery level ≤ 25%: 1 profile LED is ON (1st LED)
- Battery level ≤ 10%: selected profile LED is flashing permanently
To preserve battery life please Power Off your controller after use. To do this press
the 'PS' button until the Player LED turns off. To wake up the controller press the
'PS' button.
To preserve battery integrity, we recommend that you always re-charge when the
LED is RED or is flashing RED.
Note: ensure that your USB ports, of your PS4™ system, are still activated even when the system is in sleep
mode. This way you can charge the controller.
d. How to use the headset controls of your controller?
On the underside of your controller you have 3x buttons that will function when a
headset is connected to the controller:
- Volume UP: increase the sound volume of your headset.
- MUTE: Press to switch on the microphone mute. The profile LEDs will turn Red
to show that the Mute is activated. Press the Mute button again to switch off
the Mute feature.
- Volume DOWN: decrease the sound volume of your headset.
e. How to change the Joystick heads?
You have the possibility to change your joystick head and choose a concave or a
convex shape. Take care when removing and replacing the joystick heads. Do not
use too much force or they could become damaged.
To change the joystick head, you must:
- Remove the joystick head by
- Select your desired joystick head;
- Check the underside of the joystick head and match the shape with the shape in the
top of the shaft. Press gently until you feel the joystick head 'click' in to position.
pulling on it gently ;