Technical Specifications - I-VALO XENRE XE80 Notice D'utilisation, D'installation Et De Maintenance

EN

TECHNICAL SPECIFICATIONS

Luminaire
Ta (ºC)
Enclosure rating (IP)
Light source
Total power (W)
Voltage (V)
Frequency (Hz)
Inrush current Ipeak (A) Δt @Ipeak = 50% (s)
Efficiency factor
Connection
Max. number per automatic circuit breaker
XENRE XE80,82,84,60
XENRE XE62
Note: The values given in the table apply to standard models in the luminaire product range. We reserve the right to make changes.
Because component manufacturers develop their products independently, the number of luminaires may vary by control gear model and
manufacturer. For this reason, the manufacturer of the control gear should always be consulted to check the number of luminaires. The exact
number of luminaires is available from our customer service.
18
I-VALO OY | TEL +358 (0) 10 501 3000
XENRE®
Ta varies by luminaire model between -40°C ... +60°C.
Check the Ta range from the rating plate of the luminaire.
IP66 (equipped with the GORE filter)
IP65
LED COB
118W, 143W, 175W, 205W, 243W
220-240 V
0/50/60 Hz
XE80,82,84,60: 2x (60A 200μs)
XE62: 60A 200μs
≥0,88/0,95/0,96/0,935/0,97
ON/OFF version: cable 1.5m + Schuko plug
DALI version: cable 4.0m (L,N,PE,DA,DA) - 5 x 1.5 mm²)
B10 A B16 A
2 3
4 7
| INFO@I-VALO.COM | WWW.I-VALO.COM
C10 A C16 A
4 7
8 14