Dutch originals DO-CH-ACON090 Manuel D'utilisation page 10

Attach the exhaust hose
The device requires ventilation to the outside, so that the (hot) exhaust air and moisture
can be dispelled outside the room that is being cooled.
Do not replace or extend the exhaust hose, as it will result in decreased efficiency, and can
automatically shut down the device due to low backpressure.
1) Connect the device hose adapter
to the one end of the exhaust hose
3) Extend the adjustable window kit to the
length of your window. Connect the window
hose adapter C to the window kit
5) Connect the device hose connector
to the exhaust air outlet
B
A
E
B
5
EN 08
2) Connect the window hose adapter
to the one end of the exhaust hose
4) Close your window, and make sure
the window kit is well and firmly placed. If
needed, secure the window kit with duct
tape. The gap between the kit and the sides
of the window should be closed / sealed for
maximum efficiency.
6) Adjust the length of the flexible hose
and avoid bends. Place the device close to a
power socket.
C
A
A