The BDS System is composed of a coffee machine and by
one or two motorised Magnum measure grinders connected
via Bluetooth.
The purpose of the BDS System is to guide the user in
coffee grinding and dispensing operations.
based on the type of recipe and the relative measure grinder.
With the BDS system enabled and operating mode "Pre-
Selection" P selected, grinding of doses is carried out
solely via the sensors:
6
15
9
by technical staff.
- measure grinder with LED bar (10) on;
- machine with LED keys off.
Note: the Start/Stop key is always active.
the fork (12) a sensor is activated: 6, 15 or 9 based on the
At the end of the grinding phase, the associated keys will
be enabled on the machine which can be recognised by
the relative LEDs lighting up.
Dispensing will remain active for 2 minutes.
During this time, the measure grinder used will be blocked
and therefore unable to grind a second dose of coffee:
It will automatically release when the enabled key is pressed
or when the two minutes of waiting time elapse.
The user can disable the BDS system by setting
the operating mode "Manual" M.
11. BDS (Barista Driving System)
11 EN
15
10
9
12
15
6
10
9
12
6