Cassette Tape - Record; Before Recording; Recording Cds; Recording The Radio - Panasonic SC-PM21 Mode D'emploi

Cassette tape – Record

Before recording

Before recording
Preparation
Wind up the leader tape so that recording can begin immediately.
• Use normal position tapes.
• High position and metal position tapes can be used, but this unit will
not be able to record or erase them correctly.

Recording CDs

Recording CDs
1 Insert the cassette to be recorded on.
Press [0 OPEN/CLOSE] to insert the CD.
2
Press again to close.
Press [CD 3/8] and then [STOP 7, -DEMO].
3
Press [¶/8 REC] to start recording.
4
Recording specific CDs or tracks Recording specific CDs or tracks
Press [CD 3/8] and then [STOP 7, -DEMO].
1
Press [PLAY MODE] to select your desired mode
2
(refer page 7).
3 Press [¶/8 REC] to start recording.
Recording programmed tracks Recording programmed tracks
1 Program the tracks you want (refer page 8).
2 Press [¶/8 REC] to start recording.
10
RQT7968
Insert inside the
guides
Forward side

Recording the radio

Recording the radio
Insert the cassette to be recorded on.
1
2 Tune to the required station (refer page 11).
Press [¶/8 REC] to start recording.
3

Other basic operations

Other basic operations
To Action
erase a recorded 1) Insert the cassette to be recorded on.
2) Press [TAPE 3] and then [STOP 7].
sound
3) Press [¶/8 REC].
Press [STOP 7].
stop recording
stop recording 1) Press [¶/8 REC].
temporarily 2) Press again to resume recording.
record on the other Turn the cassette over and press
side of the tape [¶/8 REC].
Erasure prevention Erasure prevention
The illustration shows how to remove the tabs to prevent
recording. To record on the tape again, cover as shown.
Side A
Tab for side B Tab for side A
To re-record
Normal tape
Adhesive tape