auna Glastonbury Mode D'emploi page 38

EN
38
Power-saving automatic standby
As a power-saving feature, the unit will automatically switch to Standby
mode if you do not press
any buttons within 15 minutes after playback is stopped.
Setting the Clock
Note: You can set the clock in standby mode only.
1. In standby mode, long pressing the CLOCK button on the remote control
for more than 2 seconds to activate the clock setting mode, the time
format [24--H] or [12--H] will blink.
2. Press the / buttons or on the unit or
control to select a time format.
3. Press the CLOCK button to store the setting, the hour digits blink.
4. Repeat above steps 2-3 to set the hour and minute.
Note:
• To exit clock setting mode without storing, press the STOP button.
• If no button is pressed in 10 seconds, the unit exits clock setting mode
automatically.
• If a power failure occurs or the unit is disconnected from the mains, the
clock setting will be lost.
Automatically Synchronzes Clock Time
In DAB/DAB+/RDS station, when you don't set the clock, the unit can
synchronize with time transmitted by DAB/DAB+/RDS station (with CT
information) automatically first time.
Display the Clock
In any source mode, the built-in clock shows the time on the display by
press the CLOCK button.
⁄ on the remote