Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TROUBLESHOOTING

Problem
Ensure that the AC adaptor plug of the unit is connected
properly.
Ensure that there is power at the AC outlet..
No power
To save power, the unit switches to standby automatically
15 minutes after a play reaches the end and no control is
operated.
Before pressing any function button, first select the
correct source with the remote control instead of the
main unit.
Reduce the distance between the remote control and the
Remote control does
unit.
not work
Replace the batteries Insert the battery with its polarities
(+/–signs) aligned as indicated..
Aim the remote control directly at the sensor on the front
of the unit
Insert a disc.
Check if the disc is inserted with the print side facing
inward.
No disc detected
Wait until the moisture condensation at the lens has
cleared.
Replace or clean the disc
Use a finalized CD or correct format disc.
Adjust the volume.
No sound or poor
sound
Check if in muting.
Insert a readable disc and ensure that the label side faces
up..
Check for any scratches or smudges on the disc.
Moisture has condensed inside the unit. Remove the disc
and leave the unit turned on for about an hour.
Disc does not play
Disconnect and reconnect the AC adaptor plug, and then
turn on the unit again.
As a power-saving feature, the unit turns off automatically
15 minutes after disc play reaches the end and no control
is operated.
Possible Reason / Solution
EN
49

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

10031824

Table des Matières