Regular Maintenance - MYERS 99082 Manuel Du Propriétaire

OWNER'S MANUAL
HYDRAULIC JACK MAINTENANCE GUIDE
IMPORTANT: Service jacks are designed for lifting purposes only; always support raised load with jack stands

REGULAR MAINTENANCE

• MONTHLY or as necessary (depending on usage)
1 Using a grease gun, add grease to grease fitting in the lift arm pivot shaft
(Use a multi-purpose NLGI type grease only )
2 Lubricate all linkages and pivot points
(Use white lithium spray grease only )
3 Remove handle; lubricate handle receptacle and handle end
(Use white lithium spray grease only )
4 Lubricate both rear casters, bearing and both front wheels
(Use white lithium spray grease only )
5 Tighten all accessible hardware
#3
#4
#2
99082
#1
#2
5
2 TON ALUMINUM
FLOOR JACK
#2
#2
#4
#4
#3
#2 #2
99082
#2
Rev 3/16/21