TypeS AC57881 Manuel D'utilisation page 9

OPERATING INSTRUCTIONS CONT.:
iii) 12V Battery Connected :
vi) 6V Battery Connected :
ix) Test Mode
x) Reverse Polarity
iv) Charging in Process :
vii) Charging in Process :
If 6V or 12V flashes alternatively it means that the
connected battery is either a discharged 12V battery
(down to roughly 7.6-10.5V) or a fully charged 6V
battery. The charger is trying to determine which kind
of battery has been connected. After 1-2 minutes the
charger will determine whether the battery is a 6V or 12V
battery and it will either perform a maintenance charge
for a 6V battery or start charging for a 12V battery.
NOTE: If you are sure the connected battery is a 12V
battery, press and hold
change to 12V Charging Mode.
xi) Low Battery Voltage
9
v) 12V Battery Fully Charged;
Maintenance Mode in
Progress (0.3A):
viii) 6V Battery Fully Charged,
Maintenance Mode in
Progress (0.3A) :
for 3 seconds to